MRTALP4-DC3: #35058
Rev 7.4/12-21
28
A
FTER
U
SING
THE
L
IFTER
1)
1A
Press the power button (
— fig. 1A) and
the “function” button (
— fig. 1A) to
power down the vacuum lifter.
2) Charge the battery after each workday as
).
1
3) Use the hoisting equipment to lower the
lifter gently onto a stable support. Then
detach the hoisting hook from the lift
point.
Caution:
Do not set the lifter on surfaces
that could soil or damage vacuum pads. Protect their sealing rings by making sure each
pad rests on spacers.
2
Storing the Lifter
1)
1B
Use the covers supplied to keep the vacuum pads clean (fig.
1B).
CE/UKCA
— To prevent the lifter from tipping over on relatively
horizontal surfaces, place the vacuum pads facedown on a clean,
smooth, flat surface. Then lower the lift bar and place a support
under the lift point.
2) Charge the battery completely and repeat every 6 months
).
1..... To maximize battery life, charge it promptly after each use.
2..... Cardboard spacers are integrated into the original shipping container. Similarly shaped spacers should be used when setting the lifter on other
surfaces.
OPERATION