1x4 Splitter with 150m Extension
9
5. RS232 Control
l
When the splitter needs to be controlled via RS232, please connect the control PC
to the
MASTER
RS232 port, and install control software in PC, and then send
RS232 commands of splitter to control.
l
When the third-party device needs to be controlled via RS232, please connect PC
to the
REMOTE
port, and install control software in PC, then send RS232
commands of third-party device to control.
5.1 RS232 Control Software
l
Installation:
Copy the control software file to the computer which connected with
the splitter.
l
Uninstallation:
Delete all the control software files in corresponding file path.
Basic Settings:
First connect all input devices and output devices are needed, then connect it with a
computer which is installed with RS232 control software.
Double-click the software icon to run this software. Here we take the software
CommWatch.exe
as example. The icon is shown as below: