Wowitoys H4809C, Manual, Page: 7 / 12

10
1. Turn on the drone and controller. Push the
left throttle of controller up and down one time to
pair the drone.
2. Press Speed-Up button till speed level up to 100%.
3. Then push both left and right throttle of controller z
to left-down corner (7 o'clock direction).and hold for
3 seconds
，
the LED light will flash. Now the drone
is recovered to its original factory setting and ready
to fly again. Remember to set the speed back to
speed 1 ( One Beep) before you start to fly. You
should always be in Speed 1 when you take off.
8
9
10
11
6