background image

3

2.LED CONTROL function button:

Press this button for above 2 seconds, it will turn off the LED lights;

Press this button for above 2 seconds once again, it will turn on the LED lights.

HEADLESS CONTROL FUNCTION 

RETURN TO HOME FUNCTION 

FLIP FUNCTION 

Press this button once, it will activate the flip function. Push the right hand lever in 

any direction, the drone will flip in that direction accodingly.

Emergency lock function

When you find the drone is very near to the people or obstacles during flying,

you could press the two top buttons on the controller together to cut off the

signal then to stop drone’s flying immediately, to avoid crashes to the people

or obstacles. You could turn on the drone to enjoy the flying again as usual.

 

SPEED CONTROL FUNCTION 

Still press the headless button to go back to the normal mode

.

Photo & Video function

1. Press this button once, it will takes a picture, press again, it will takes 2nd picture.

2. Press this button for 3 seconds, you will hear 2 beeps, it starts to record the video,

and press this button again for 3 seconds, it will stop to record the video.

Summary of Contents for H4809C













Reviews: