11
4. LED:
Press the LED button to turn off/on the lights.
5. Emergency Stop:
Only stop motors mid-flight in an emergency situations, Doing so can
reduce the risk of damage or injury.
Long pressing this button for three seconds will activate emergency stop
function.
Reseting the drone
If you are experiencing issues controlling the drone & it is not
responding correctly to the controller, it can be reset by following steps :
1. Turn on the drone & controller, place the drone on a flat ground
(it is very important), then push the left throttle of the
controller up & down once to pair with the drone.
2. Then push both left & right throttle of the controller to the
left-down corner (7 o'clock direction). This will reset the
drone to its original factory settings & will be ready to fly
again.