17
Getting Started
Getting Started
Warning: To avoid injury, DO NOT attempt to operate your radio if the antenna is
damaged or defective. DO NOT attempt to operate your radio without an antenna
connected to the radio. Transmitting without an antenna or a correctly tuned antenna
directly and properly connected to the radio may damage the radio and void the war-
ranty.
Installing the Belt Clip
The belt clip attaches to the back of the radio with the two supplied screws. To install
the belt clip, press it against the back of the unit and line up the screw holes. Insert each
screw one at a time and tighten until there is no further resistance and the belt clip is
firmly attached to the radio. Do not overtighten the screws.
Programming Your Radio
The KG-S84B includes many advanced features that are only available using the
optional Wouxun programming software and cable. The software is available as a free
download. The 2-pin Wouxun programming cable (PCO-001) is an optional accessory.
Both are available at BuyTwoWayRadios.com.
