Worx WX852, Manual

Page: 8 / 16

8
EN
12V Multifunction Jump Starter
with LED Lights
PROTECTION
Disposal
The machine, its accessories and packaging materials should be sorted for environmentally friendly
recycling. The plastic components are labeled for categorized recycling.
NEW SMART CABLE SPECIFICATION
Operations Standards LED Indicator
Low Voltage Protection
Lithium BV<10V+/-0.3V
Vehicle BV<4.5V
Red LED Blink with Buzzer Shout;0.5s
Low Voltage Override
Function
Vehicle BV: 2V - 4.5V
Push the button in 4s, the Green LED Solid
Lighting.
Over Voltage Protection Vehicle BV > 15V Red LED Blink with Buzzer Shout;1s
Reverse Polarity Reverse Polarity Protection Red LED Blink with Buzzer Shout;0.1s
Short-circuit Short-circuit Protection
Red LED Solid Lighting and Buzzer
Shout in Rapidly
Reverse Charge Protection Reverse Charge Protection Blue LED Blink with Buzzer Shout, 0.5s
Smart cable connects to car
battery first, then plugs into
the jump starter
Work normally
Green, RED, BLUE LED Solid
Lighting
Smart cable plugs into the
jump starter
In Standby Mode Blue LED Blink
Cable Right Connection
Work normally Green LED Solid Lighting
Smart cable disconnects to
the car battery
Automatic detection to the
standby mode
Blue LED Blink
Jumping time limited
Maximum 60s, then shut
down
After 60s, it will automatic protect. The
Blue LED Blink with Buzzer Shout, 0.5s
Over-Temperature
Protection
≥ 60° C, then shut down
RED LED blink with buzzer shouts
twice (0.2s apart), after 1s gap, shouts
twice again (ibid.), and so on