Rotary
hammer
EN
9
ADDITIONAL SAFETY
POINTS FOR YOUR ROTARY
HAMMER
1.
wear ear protectors.
Exposure to noise
can cause hearing loss.
2.
Use auxiliary handles supplied with
the tool.
Loss of control can cause
personal injury.
3.
Always wear a dust mask.
4.
hold power tools by insulated
gripping surfaces when performing
an operation where the cutting tool
may contact hidden wiring or its own
cord.
Contact with a ‘live’ wire will make
exposed metal parts of the tool ‘live’ and
shock the operator.
5. Connect the mains plug only when the tool
is switched off. After using, pull the mains
plug.
6. Always direct the cable to the rear away
from the machine.
7. Persons under 16 years of age are not
permitted to operate this machine.
8. Keep the tool and accessories out of the
reach of children.
9. Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
10. Fully unwind cable drum extensions to
avoid potential over heating.
11. When an extension cable is required you
must ensure it has the correct ampere
rating for your power tool and that it is in a
safe electrical condition.
12. Ensure your mains supply voltage is the
same as your tool rating plate voltage.
13. Your tool is double insulated for additional
protection against a possible electrical
insulation failure within the tool.
14. Always check walls and ceilings to avoid
hidden power cables and pipes.
15. After long working periods, external metal
parts and accessories could be hot.
16. Wear eye protection when operating this
tool.
17. Your hand must hold on the handle when
you are working.
SYMBOLS
To reduce the risk of injury, user
must read instruction manual
Warning
Double insulation
Wear eye protection
Wear ear protection
Wear dust mask
Waste electrical products should
not be disposed of with household
waste. Please recycle where
facilities exist. Check with your
local authority or retailer for
recycling advice.
