7
Do not dispose of batteries. Return exhausted batteries
to your local collection or recycling point.
Operating instructions
Note:
Before using the tool, read the instruction book carefully.
Intended use:
The machine is intended for sawing wood, plastic, metal and building
materials while resting firmly on the workpiece. It is suitable for
straight and curved cuts. The saw blade recommendations are to be
observed.
REPLACING/INSERTING THE SAW BLADE (See Fig.A, B)
Before any work on the machine itself, remove the battery.
——INSERTING THE SAW BLADE
Wear protective gloves when assembling the saw blade.
Contact
with the saw blade can lead to injuries.
The machine is equipped with a tool-free blade holder (10). This
makes possible easy and quick changing of the saw blade without
any additional tools.
Rotate the ring counterclockwise (jigsaw upside down) and hold in
position. Fully insert the blade (8) into the blade holder slot with blade
teeth facing forward then release the ring, which will self-rotate and
clamp over the top of the blade. While inserting the blade, ensure that
the back of the blade is positioned in the groove of the guide roller (7).
——REMOVING THE SAW BLADE
To remove a blade, hold the blade and rotate the blade holder ring
counterclockwise to release the blade.
Warning:
The blade may be spring ejected so protect your eyes.
ADJUSTING THE CUTTING ANGLE (See Fig.C, D)
Using a Hex key. Loosen the bolts securing the base plate. For preset
1
2
