12
Cordless lawn mower
WG784E WG785E
5. hANdle AdJuSTMeNT (See fig e)
The upper handle can be adjusted to 3 different height
positions. Release the locking cam lever, set the upper
handle to one of the three height positions, and make
sure to insert the pin into the hole. Then reset the
locking cam lever.
NoTe:
Always check that the upper handle is fixed
firmly.
6. fITTING/ReMovING BATTeRy (See fig. f1, f2)
ReMovING BATTeRy
Pull out the battery with the battery handle directly.
(See F1)
NoTe:
Be careful not to drop the battery onto your foot
or on the ground when removing it.
fITTING BATTeRy
Put the battery into the battery container; make sure the
battery is fitted correctly. (See F2)
OPERATION
1. STARTING ANd SToPPING (See fig G1, G2)
WARNING!
The blade continues to rotate for a
few seconds after the machine is switched off.
Allow the motor/blade to stop rotating before switching
“on” again. Do not rapidly switch off and on.
STARTING
1) Insert safety key into the housing of the switch box.
2) Slide the key to the right and hold in position.
3) Pull the lever bar towards the handle and the mower
will start.
4) Release the safety key.
SToPPING
Release the switch lever.
E
F1
F2
G1
1
