Worx WG744E, Manual

Page: 15 / 176

15
Cordless Lawn Mower EN
TECHNICAL DATA
Type
WG744E, WG744E.9
(740-789 - designation
of machinery, representative of Cordless Lawn
Mower)
WG744E WG744E.9
Voltage 40V Max (2x20V Max)*
Cutting diameter 40cm
Front wheel
diameter
160mm
Rear wheel
diameter
240mm
Cutting height 20mm-70mm
Cutting height
positions
6
Grass collection
capacity
40L
Battery type Lithium-ion /
Battery Model WA3553(4.0Ah) /
Charger Model WA3883 /
Charger rating
Input:
100-240V~50-60Hz,
Output1: 20V ,
2.0A**
Output2: 20V ,
2.0A**
/
Charging time
(approx.)
Battery pack:
2.0 Ah (1pc)
2.0 Ah (2pcs)
4.0 Ah (1pc)
4.0 Ah (2pcs)
0.5 hr
1 hr
1 hr
2 hrs
/
Machine Weight 16.7kg 15.4kg
*Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal
voltage is 18 volts.
** Charger output 1 and output 2 mean two ports
with the same output voltage and current.
NOISE DATA
A weighted sound pressure
L
wA
: 68.7dB (A)
K
pA
= 3dB(A)
A weighted sound power
L
wA
: 84.3dB (A)
K
wA
= 3dB(A)
Wear ear protection
VIBRATION INFORMATION
Typical weighted
vibration
a
h
= 0.41m/s
2
uncertainty K=1.5m/s²
WARNING:
The vibration emission value
during actual use of the power tool can differ
from the declared value depending on the ways in
which the tool is used dependant on the following
examples and other variations on how the tool is
used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained
Using the correct accessory for the tool and ensuring
it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed
WARNING:
To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate)
If the tool is to be used regularly then invest in anti
vibration accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.
ACCESSORIES
WG744E WG744E.9
Battery pack (WA3553) 2 /
Charger (WA3883) 1 /
Grass collection bag 1
Mulching insert 1
Cable clip 2
We recommend that you purchase your accessories
listed in the above list from the same store that
sold you the power tool. Refer to the accessory
packaging for further details. Store personnel can
assist you and offer advice.