Worx Trans4mer WX540, Original Instructions Manual

Page: 13 / 104

12V Li-ion multi-purposed saw EN
13 12
Occasionally you may see sparks through the
ventilation slots. This is normal and will not
damage your power tool.
TROUBLESHOOTiNg
Symptom
Possible
Causes
Possible
Solution
The tool
suddenly
stops during
operation. Over load
Battery tem-
perature too
high
Low battery
capacity
Relieve the
load on the
machine
immediately
and allow
cooling for
approx. 30
seconds by
running the
machine on
on-load .
Charge the
battery pack.
ENViRONmENTAL
pROTECTiON
This product has been marked with a
symbol relating to removing electric
and electronic waste. This means that
this product shall not be discarded with
household waste but that it shall be returned
to a collection system which conforms to the
European Directive 2002/96/CE. It will then
be recycled or dismantled in order to reduce
the impact on the environment. Electric and
electronic equipment can be hazardous for the
environment and for human health since they
contain hazardous substances.
DECLARATiON Of
CONfORmiTY
We,
POSITEC Germany GmbH
Konrad-Adenauer-Ufer 37
50668 Köln
Declare that the product,
Description
wORX Li-Ion Multi-Purposed Saw
Type
wX540 wX540.3 wX540.9
(5-designation of machinery,
representative of Saw)
Function
Sawing various materials
Complies with the following Directives,
2006/42/EC
2004/108/EC
2011/65/EU
Standards conform to
EN55014-1
EN55014-2
EN60745-1
EN60745-2-11
The person authorized to compile the
technical file,
Name: Russell Nicholson
address: Positec Power Tools (Europe)
Ltd, PO box 152, Leeds, LS10 9DS, UK
2014/02/17
Leo Yue
POSITEC Quality Manager