Worx Sonicrafter WX686, Original Instructions Manual

Page: 9 / 92

9
Oscillating Multi-Tool EN
If the tool is to be used regularly then invest in anti
vibration and noise accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.
OPERATING INSTRUCTIONS
NOTE:
Before using the tool, read the
instruction book carefully.
INTENDED USE
The power tool is intended for sawing and
remodeling wooden materials, plastic, plaster, non-
ferrous metals and fasteners (e.g. nails and clamps)
as well as for working on soft wall tiles and for dry
grinding of small surfaces. It is especially suitable for
working close to edges and for flush cutting.
ASSEMBLY AND OPERATION
Action Figure
Mounting accessories
--Remove the onboard Clip-in wrench See Fig. A
--Loosen the flange and insert accessories
See Fig. B1,
B2, B3
--Tighten the flange See Fig. C
--Store the onboard Clip-in wrench See Fig. D, E
Operating the on/off switch See Fig. F
Using the variable speed dial See Fig. G
The Variable Speed Dial can be used to set the
optimum oscillating frequency according to the
accessories used and the respective application.
Oscillation
frequency
Application
High oscillation
frequency
Sanding, sawing, rasping
and polishing stone and
metal.
Low oscillation
frequency
Scraping, polishing
varnishes.