Worx Sonicrafter WX678.9, Original Instructions Manual

Page: 10 / 92

Oscillating Tool EN
10
APPLICATION
WARNING: The sawing teeth are very sharp. Do not touch during mounting and application.
The workpiece must be clamped tightly before it is cut.
Pic Description Application
Sawing
Universal Metal/Wood End Cut
Blade
Wood, plastic, fiberglass, nails,
non-ferrous metals, thin sheet
metal, hardened fillers
Standard Wood End Cut Blade Wood, plastic, drywall
Precision Wood Cut Blade Wood, soft plastics
HSS Semicircle Saw Blade
Thin wood, plastic, fiberglass,
non-ferrous metals, thin sheet
metal, hardened fillers, window
glazing
Sanding
Sanding Pad (Perforated) Wood, plastic, hardened fillers
Sanding Finger Pad Wood, plastic, hardened fillers
Rasping
Triangular Carbide Grit Rasp
Wood, hardened adhesives, thin
set, masonry
Carbide Rasp (Finger Shaped)
Wood, hardened adhesives, thin
set, masonry
Removing
grout
Carbide Grit Semicircle Saw Blade Grout, porous concrete, masonry
Diamond-Coated Semicircle Saw
Blade
Ceramic and stone tile,
backerboard
Scraping
Rigid Scraper Blade
Old paint, hardened adhesives,
caulk, carpet
Flexible Scraper Blade
Elastic sealants, paint, adhesive
residues, carpet
We recommend that you purchase your accessories listed in the above list from the same store that sold you the
tool. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice.
NOTE:
When plunging and sawing use a slight pendulum motion, to allow sufficient chip removal.
The saw blade lasts longer if the wear is distributed evenly. To ensure an even distribution, loosen the saw blade,
rotate it and retighten firmly.
Cut/Sand with a constant movement and light pressure. \Heavy pressure does not increase the cut/removal rate –
the accessory merely wears faster.