background image

20V Li-ion Blower  

EN

8

i)   Keep battery pack out of the reach of 

children.

j)   Seek medical advice immediately if a cell 

or battery has been swallowed.

k)   Always purchase the battery 

pack recommended by the device 

manufacturer for the equipment.

l)   Keep battery pack clean and dry.

m)   Wipe the battery pack terminals with a 

clean dry cloth if they become dirty.

n)   Battery pack needs to be charged before 

use. Always use the correct charger and 

refer to the manufacturer’s instructions 

or equipment manual for proper charging 

instructions.

o)   Do not leave battery pack on prolonged 

charge when not in use.

p)   After extended periods of storage, it may 

be necessary to charge and discharge 

the battery pack several times to obtain 

maximum performance.

q)   Battery pack gives its best performance 

when it is operated at normal room 

temperature (20 °C ± 5 °C).

r)   When disposing of battery packs, keep 

battery packs of different electrochemical 

systems separate from each other.

s)   Recharge only with the charger specified 

by WORX. Do not use any charger other 

than that specifically provided for use 

with the equipment. 

A charger that is 

suitable for one type of battery pack may create 

a risk of fire when used with another battery 

pack. 

t)   Retain the original product literature for 

future reference.

u)   Use only the battery pack in the 

application for which it was intended.

v)   Remove the battery pack from the 

equipment when not in use.

w)   Dispose of properly.

Summary of Contents for 20V Power Share WX094L













Reviews: