UR8200 / English Instruction Manual
6
U
sing th
e
FM menu
1. In FM mode, press and hold the
„MENU“ button (9) to access the FM menus.
2. Press the
◄◄ or ►► button (10 or 11) to cycle through the below options.
SCAN
SYSTEM
See below for details of each option.
Scan
1. Press the
„SELECT“ button (6) to confirm the selection “SCAN”.
2. Press the
◄◄ or ►► button (10 or 11) to cycle through the below options.
“LOCAL”: Search for local stations with strong signals only.
“DX”: Search for all stations regardless of the signal strength.
3. Press the
„SELECT“ button (6) to confirm the selected option.
System
See chapter “System menu” for details.
USING THE ALARMS
Setting alarms
The radio lets you have 2 alarm settings.
To set the alarm:
1. Switch the unit on and press the
“ALARM” button (7) to select between Alarm 1 and Alarm
2 and then press the
„SELECT“ button (6) to confirm the selection. The selected alarm 1 or
alarm 2 icon flashes on the display.
2. Press the
◄◄ or ►► button (10 or 11) to set the hour time of the alarm and then press
the
„SELECT“ button (6).
3. Press the
◄◄ or ►► button (10 or 11) to set the minute time of the alarm and then press
the
„SELECT“ button (6).
4. Press the
◄◄ or ►► button (10 or 11) to cycle through the duration options and then
press the
„SELECT“ button (6) to confirm the selection.
The duration defines the time before the radio returns to standby mode if the alarm is not
deactivated. Duration options: 15, 30, 45, 60, 90 and 120 minutes.
5. Press the
◄◄ or ►► button (10 or 11) to cycle through the source options and then
press the
„SELECT“ button (6) to confirm the selection.
The source defines the sound source of the alarm. Source options: DAB, FM and Buzzer.
If DAB or FM is selected, you will also be prompted to select the last played station or one
of the preset stations (if set) as the alarm.
6. Press the
◄◄ or ►► button (10 or 11) to cycle through the interval options and then
press the
„SELECT“ button (6) to confirm the selection.
The interval defines on which days the alarm is active.
Interval options: Daily, Once, Weekends and Weekdays.
If “Once” is selected, you will also be prompted to set a specific date.
7. Press the
◄◄ or ►► button (10 or 11) to adjust the volume level and then press the
„SELECT“ button (6). This setting defines the sound volume of the alarm.
8. Press the
◄◄ or ►► button (10 or 11) to select alarm on or off and then press the
„SELECT“ button (6) to confirm the selection.
When the alarm setting is active, the corresponding alarm 1 or alarm 2 icon will show on the
display.
At the set time, the alarm will sound. The volume will increase gradually until it reaches the
set volume level. The corresponding alarm icon will also flash on the display.
