WorldTracker WTGAT, Manual

Page: 19 / 76

- 19 -
19
WTGAT is in sleep mode.
Panic input: Disable or enable panic button input (5)
Panic Response Select to dial-out first or send SMS first when Panic Input
is activated.
SMS during Panic Voice Call: Receive SMS location message(s) during Panic Voice
call. This will send every 10 seconds 1 SMS message as
long as the Voice call is connected. Only 1 SMS is send if
GPS location is NON-Valid and up to 3 messages when
GPS location is valid.
Please note that not all GSM
providers allow sending SMS when connected to
Voice call. Please check with your GSM provider first.
Dial-out number 1: When entered this number will be dialed automatic when
panic button is activated.
(3)
Dial-out number 2: When entered this number will be dialed automatic when
panic button is activated.
(3)
Dial-out number 3: When entered this number will be dialed automatic when
panic button is activated.
(3)
Speed limit: Over the speed limit will send out message (1)
Speed limit activation time: Time of the speed keep over speed limit (1)
Park/Motion/24H Switch
Function: Select function for Park, Motion or 24H switch.
The selected function will be enabled when the switch is
ON.
Auto Pickup after (0-9) rings Setup if the unit will auto pickup incoming voice call
‘0’ zero will not enable any incoming voice calls
Speaker on Select if build in Speaker will be activated for incoming
phone call.
After Panic message send
activate Buzzer for 1 second Select to activate the internal buzzer for 1 second when
Panic button is activated and SMS message sending was
successful.
Panic Response: Select ‘Dial out’ or send SMS/GPRS message first.
SMS tracking interval online For SMS or GRRS mode and WTGAT is activating.
Add IMEI number to SMS
messages The GSM IMEI number can be added to every SMS
message received except multiple location messages.
The IMEI number is added at the end off the message.
Clear all saved locations: This will clear all saved GPS locations from memory
Working mode Switch between SMS only mode and SMS+GPRS mode
------------------------------------------- -----------------------------------------------------------------------------
GPRS Mode: Select between UDP or TCP protocol
Static IP Addr. Or Domain name
for GPRS: Enter static IP address or Domain name to receive GPRS
data
UDP destination port UDP port for GPRS data
TCP destination port TCP port for GPRS data
APN name Access point name for GPRS data) (case sensitive)
GPRS login name For setup GPRS connection
GPRS password For setup GPRS connection
Optimize GPRS data The ‘location message’ when using GPRS will be reduced
by about 25% to save data communication costs. Remove
comma, points and other exclamation from GPRS data.
Send data using SMS if GPRS
fails This will send the data as SMS message if the GPRS
connection fails or is not available. As soon as GPRS is
available again the tracking unit will continue sending data