WorldTracker WTGAT, Manual

Page: 30 / 76

- 30 -
30
* Status message is send when valid GPS location is found. If no valid GPS location is found during
‘Real time wake up’ then status message will be send after 5 minutes. After message is send the
WTGAT will wait another 3 minutes for any SMS messages returned before returning to sleep mode.
46,xx, - >
Configure wake up delay time in minutes when entering sleep mode.
Must be in Hex format (001 to $59F) – MUST be 3 DIGITS!
When configured the WTGAT will wake up when the configured delay time expires.
Example:
05*827,46,02A,0 - Wake up after 42 (Hex 02A) minutes.
Just before the WTGAT enters sleep mode the wake up delay time will be added to the current time from the
real time clock. As example the current time is 12:05:20 (before entering sleep mode) and the wake up delay
time in minutes is 46 (as example above) then the WTGAT will wake up at 12:47:00. Every time the WTGAT
enters sleep mode the wake up delay time is added to the current time.
47,x, - >
(x=0 -> AGPS data upload disabled)
(x=1 -> Enable AGPS data upload) *
Example: 05*827,47,1,0 - Enable AGPS data upload
* AGPS data upload used GPRS communication. You need to be registered before data can be uploaded.
The WTGAT will automatic download the AGPS data support file every 13-14 days.
5,xxxxxx..x, (xxxxx.x New Base1 Phone number for Tracking unit) -16 Digits max.
Example: 05*827,5,+6790887676,0 - new Base1 Phone number is +6790887676.
51,x, - >
(x=0 -> Normal running mode – GSM on when in sleep mode)
(x=1 -> Basic sleep mode – GSM and GPS off)
(x=2 -> Deep sleep mode – GSM and GPS off)
Example: 05*827,51,1,0 - Enable Basic sleep mode
52,aa,bb,c,
aa = Delay time ADC input (in Hex from 00 to FF) - 00 = disabled - MUST BE 2 DIGITS!
bb = ADC input trigger level (in Hex from 00 to FF) - MUST BE 2 DIGITS!
c = 0 - Below trigger level
1 - Above trigger level
Example: 05*827,52,2F,5B,1,0 - Delay time is 47 seconds, Trigger level is 91 and trigger above value.
53,xxxxxx..x, (xxxxx.x New Base2 Phone number for Tracking unit) -16 Digits max.
Example: 05*827,53,+8932324,0 - new Base2 Phone number is +8932324.
To configure empty (none) phone number use the ‘05*827,53,,0’ command
55,x, (Custom message to Base2)
x=0 -> Disabled
x=1 -> Enabled
Example: 05*827,55,1,0 - Custom message enabled to Base2.
56,xxxxxx..x, (xxxxx.x New SMSC number ) - (16 Digits max).
Example: 05*827,56,+12232443,0 - new SMSC number is +12232443
To configure empty (none) phone number use the ‘05*827,56,,0’ command
57,xxxxxx..x, (xxxxx.x New Phone number for Third Tracking base Phone)- (16 Digits max).
Example: 05*827,57,+12232443,0 - new Base3 Phone number is +12232443
To configure empty (none) phone number use the ‘05*827,57,,0’ command
58,x, - >
(x=0 -> Speaker on (default)
(x=1 -> Internal and external (if connected) Speaker off)
Example: 05*827,58,1,0 - Internal and external (if connected) Speaker off
59,x,
(x=0 -> Do not activate buzzer for 1 second after Panic message send successful)
(x=1 -> Activate buzzer for 1 second after Panic message send successful )
Example: 05*827,59,1,0 - Activate buzzer for 1 second after Panic message send successful
60,x,
(x=0 -> Dial out first if Panic input is activated (if Dial out numbers are configured)