24
RECOMMENDED
MAINTENANCE
SCHEDULE(S)
Maintenance Service Interval
Maintenance Procedure
Before each use or daily
•
Check the engine oil level
•
Check the mower blades
•
Check the safety interlock system
•
Check for loose hardware
•
Check for belt obstructions
•
Check for fuel and oil leakage
•
Clean the engine and exhaust system area
•
Clean the grass and debris build-up from the machine and
cutting deck, including under the deck
After the first 8 hours
•
Change the engine oil
After the first 100 hours
•
Check the wheel hub torque
•
Torque the wheel lug nuts
•
Clean dust and dirt from cylinder and cylinder head fins
•
Clean and regap spark plugs
Every 40 hours
•
Check the condition of the belts
•
Check the tire pressures
•
Lubricate the caster wheel bearings
Every 100 hours
•
Change the engine oil.
•
Change engine oil filter
•
Check the hydraulic oil level
Every 200 hours
•
Grease the lift linkage pivots
Every 250 hours
•
Replace the primary air cleaner
•
Check secondary air cleaner
– replace if dirty. See the
Engine manual for additional information
Every 500 hours
•
Check the wheel hub torque
•
Torque the wheel lug nuts
•
Replace the secondary air cleaner. See the Engine manual
for additional information.
Every 1000 hours
•
Change Hydro fluid and filter
Monthly
•
Check the battery charge
Yearly
•
Grease the front caster pivots
Summary of Contents for Venom WYS48FX730VX
