STEP
-1
B
A
X 4
B1
B2
B3
B4
Page
4
Using a second person to assist, carefully place the Cabinet (A) upside down onto a padded, non-marring
surface. Align the thread of each Leg (B) with the threaded insert located at each corner on the bottom of
Cabinet (A) as shown. Rotate the Legs (B) clockwise until they are fully tightened. Repeat this process to
install the remaining Legs (B).
B
STEP
-
2
Using a second person to assist, carefully turn the assembly upright so that it rests evenly on the legs.
Next, carefully open the doors by pulling on the pre-installed ribbon as shown. Unscrew the
P
an
H
ead
S
crew
(H-1)
and Handle Knobs (
D
) from the interior of the door using a Phillips head screwdriver (not
included). Discard the ribbon. Once both Handle Knobs (D) have been removed, reinstall them on the
FRONT of the doors using the same
pan head
screw hardware and Phillips head screwdriver. Turn the
screwdriver
(T-1)
clockwise until the screw is snug and make sure the Handle Knobs (
D
) are upright and
level on the front of the door assembly.
Unsfasten
Fasten
Summary of Contents for Naisha 607438
Page 7: ...Page 7...
