A
B
Align and insert ring of the Frame (A) onto
S
crew
(H-1)
as shown above in the
drawing. Place Glass (B) on sconce as shown above in the drawing. Product is
ready to use.
Mark the location of the hole at the desired location. Pre-drill holes at the marked location
with Drill Machine (T-2) (not included).
Insert Drywall anchor (H-2) in the pre-drilled holes
and tighten fully with Philips screwdriver (T-1) (not included) until flush. Align Screw (H-1)
onto installed Drywall anchor (H-2) and tighten with Philips screwdriver (T-1). Leave 1"
Screw (H-1) protruded from the wall.
(T-
2
)
(Not included)
(H-
1
)
(
T-1) (Not included)
(H-2)
Step-1
Step-2
ASSEMBLED VIEW
