Step 3
NOTE : Levelers can be used for adjustment if needed
H-5
Page 5
T-1
E
FRONT
Step
4
Using a second person to assist you carefully turn the chair upright. Insert Wood Caps (H-5) into the
corresponding countersunk holes in the Backrest (D) to hide the bolt heads. Next, place Back Cushion
(E) into position as shown. Assembly is now complete and the product is ready for use.
NOTE: Check that all hardware remains fully tightened every 3-4 months to ensure stability. Adjustable levelers
on the bottom of the chair's feet can be used for additional leveling adjustments if needed.
Using a second person to assist you, carefully place the
Lef
t
Leg Frame (B) down into position, making
sure that it aligns with the corresponding labels "C-C" and "D-D" along both the Seat (C) and Backrest (D)
assemblies as shown. Secure
Left
Leg Frame (B) to Seat (C) using Long Allen Bolts (H-1), Lock Washers
(H-3) and Flat Washers (H-4), stacking the hardware in the order as shown. Engage the bolts by hand but
do not fully tighten them yet. Next, secure
Left
Leg Frame (B) to Backrest (D) using Short Allen Bolts
(H-2)
as shown. Engage the bolts by hand. At this time, fully tighten ALL Allen Bolts from Steps 1-3 using
Allen Key (T-1).
Hardware Use -
1-
(H-1)-4
x
2-
(H-2)-
2
x
3-
(H-3)-4
x
4-
(H-4)-4
x
H-
3
H-4
H-
1
Hardware Use -
1-
(H-5)-
4x
B
C
D
NOTE:
DECORATIVE WOOD PLUGS ARE
INCLUDED WITH THE ASSEMBLY AND MAY BE
USED TO CONCEAL THE HARDWARE HOLES
AT THE BACK OF THE CHAIR IF DESIRED
Summary of Contents for Charlee Bobbin 618952
Page 7: ...Page 7...
