ii
SAFETY PRECAUTION
The following procedures are intended to protect you from personal injury and/or
property damage.
The types of rules to be observed are classified and explained under the following
symbols. (The following are examples of picture displays.)
The following symbols classify the degree of danger and explain the damages that
could occur when its contents are ignored and the pump is used erroneously.
Please turn the power off.
Carrying out the procedure while the power is on risks an electric shock. When
performing the procedure, power must be turned off and the pump or device
stopped.
Warning:
Non-compliance can lead to fatal or serious injury.
Precaution:
Non-compliance can lead to some injury and/or property
damage.
This symbol indicates a warning or precaution.
This symbol indicates a required action.
This symbol indicates a prohibited action.
Do not use any power source other than that specified.
Breakdowns, fire or electric shock may occur as a result of using a voltage other
than what is indicated on the nameplate. Do not use any power source other than
the one specified.
Please discontinue the operation.
When sensing any danger or irregularity during an operation, please suspend the
operation and start from the beginning.
Avoid contact with water.
Spilling liquid on the motor or wiring may lead to fire or electric shock. Please install
the pump at a place where it will not get wet.
In case of a damaged pump
A damaged pump has the potential risk for a short circuit or electric shock. Never
use a damaged pump.
