AFTER SALES SUPPORT
e-mail: [email protected]
1800 909 909 (toll free)
MODEL No.: IW36 • 61551 • 07/2018
AFTER SALES SUPPORT
e-mail: [email protected]
1800 909 909 (toll free)
MODEL No.: IW36 • 61551 • 07/2018
14
15
d) When you are not using the charger, remove the plug from the
mains socket. Do not pull the plug out by the power cord.
e) Handle the battery pack carefully. Do not let it fall or be subject to
impact.
f) Always remove the plug from the power socket before you clean or
maintain the charger or battery pack.
g) Do not charge the battery pack if the ambient temperature is less
than 0°C or greater than 45°C.
h) Do not short circuit the battery pack. A short circuit gives rise to
a heavy current causing overheating and the possibility of fire or
explosion.
i) Do not connect a cable to the battery pack terminals.
j) Make sure that no metal objects such as a nail, paper clip or coin
finds its way into the charging socket.
k) A damaged battery pack or one which no longer holds its charge
must be disposed of in a special way and not placed for normal
household rubbish collection.
l) Never throw a battery pack into a fire or into water.
m) Keep handles dry, clean and free from oil and grease. Slippery
handles do not allow for safe handling and control of the tool in
unexpected situations.
NOTE: This unit may not be used by people (including children)
with reduced physical, sensory or mental capacities, with a lack of
experience and without the appropriate knowledge, unless they are
supervised by someone who is responsible for their safety or have
been instructed by such a person with regard to how the unit is to
be operated.
Children should be supervised to ensure that they do not play with
the device.
Wear eye protection.
Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
• When using the Impact Driver/Wrench, use safety equipment including
safety glasses or shield, ear defenders, and protective clothing including
safety gloves. Wear a dust mask if the Impact Driver/Wrench operation
creates dust.
If in doubt, do not plug in the tool. Using a power source with a voltage less
than the nameplate rating is harmful to the motor.
The tool must be used only for its prescribed purpose. Any use other than
those mentioned in this Manual will be considered a case of misuse. The user
and not the manufacturer shall be liable for any damage or injury resulting
from such cases of misuse.
To use this tool properly, you must observe the safety regulations, the
assembly instructions and the operating instructions to be found in this
Manual. All persons who use and service the machine have to be acquainted
with this Manual and must be informed about its potential hazards.
Children and frail people must not use this tool. Children should be
supervised at all times if they are in the area in which the tool is being used.
It is also imperative that you observe the accident prevention regulations in
force in your area. The same applies for general rules of occupational health
and safety.
The manufacturer shall not be liable for any changes made to the tool nor for
any damage resulting from such changes.
Even when the tool is used as prescribed it is not possible to eliminate all
residual risk factors. The following hazards may arise in connection with the
tool’s construction and design:
• Damage to the lungs if an effective dust mask is not worn.
• Damage to hearing if effective ear defenders are not worn
Additional safety rules for charger & batteries
a) Use only compatible ALDI Xfinity 20V charger and batteries with this
Impact Wrench (not supplied).
b) Protect the charger and battery pack against moisture including rain
and high humidity.
c) Always check that the power cord is correctly connected before
using the charger.
