AUS
DP17
<Chapter>
AFTER SALES SUPPORT
27
1300 855 831
MODEL: DP17L PRODUCT CODE: 53664 08/2018
XIII. STORAGE
WARNING!
Store the drill press away safely so it cannot be started by unauthorised persons and
that nobody can be injured.
m
CAUTION!
Do not store the drill press unprotected outdoors or in a moist environment.
Store the device and its accessories in a dark, dry and frost-proof place that is
inaccessible to children. The optimum storage temperature is between 5 and
30˚C.
Store the drill press in its original packaging.
Cover the drill press in order to protect it from dust and moisture.
Store the operating manual with the electrical tool.
XIV. ELECTRICAL CONNECTION
The electrical motor installed is connected and ready for operation. The
connection complies with the applicable Australian standards.
The customer's mains connection as well as the extension cable used must
also comply with these regulations.
Damaged electrical connection cable
The insulation on electrical connection cables is often damaged.
This may have the following causes:
•
Passage points, where connection cables are passed through windows or
doors.
•
Kinks where the connection cable has been improperly fastened or routed.
•
Places where the connection cables have been cut due to being driven over.
•
Insulation damage due to being ripped out of the wall outlet.
•
Cracks due to the insulation ageing.
Such damaged electrical connection cables must not be used and are life-threat-
ening due to the insulation damage. Check the electrical connection cables for
damage regularly. Make sure that the power is switched off before inspecting the
cable. Electrical connection cables must comply with the applicable Australian
standards and must be correctly marked. Only use connection cables with the
marking ''H05VV-F''. Replacement cables can only be fitted by an approved and
certified electritian. If you are in any doubt please contact the help line at the foot
of this page.
AUS
DP17L
Storage/Electrical connection
