AFTER SALES SUPPORT
25
1300 855 831
MODEL: DP17L PRODUCT CODE: 53664 08/2018
AUS
DP17L
Technical data/Transport/Maintenance
Wear hearing protection.
The effects of noise can cause a loss of hearing.
Reduce noise generation and vibration to a minimum!
•
Use only equipment that is in perfect condition.
•
Maintain and clean the equipment regularly.
•
Adopt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when not in use.
Levels of noise and vibration were determined according to the norms and regula-
tions in the declaration of conformity. Technical and visual changes may be made
as part of ongoing development without announcement. All dimensions, instructions
and specifications are therefore without guarantee. Legal claims on the basis of the
operating manual may therefore not be asserted.
The vibration emission value has been measured according to a standardised test-
ing method and may be used for comparison with another electric tool. The indicat-
ed vibration emission value may also be used for an introductory assessment of the
exposure.
WARNING!
The vibration emission value whilst actually using the electrical tool may vary from
the given values independently of the type and way in which the electric tool is used.
Safety measures for the protection of the operator are to be determined that are
based on an estimate of the actual exposure under the real operating conditions (for
this, all parts of the operating cycle are to be taken into account, for example, times
in which the electric tool is turned off, and those during which it is turned on but
running without a load).
XI. TRANSPORT
WARNING!
Unplug the machine from the mains during transport.
The machine must only be lifted and transported on its belt housing. Never lift the
machine at the safety devices, the adjusting levers, or the drill chuck.
XII. MAINTENANCE
WARNING!
Prior to any adjustment, maintenance or service work disconnect the
mains power plug!
