AFTER SALES SUPPORT
15
1300 855 831
MODEL: DP17L PRODUCT CODE: 53664 08/2018
AUS
DP17L
Safety regulations
running.
Always put the drive mechanism in the standby position first and then turn on the
power tool.
•
Do not remove accumulated drill chips with your bare hands.
There is a risk of injury due to hot and sharp metal shavings in particular.
•
Break up long drilling chips by interrupting the drilling operation with a
short backward rotation of the rotary wheel.
Long drilling chips may cause injury.
•
Keep handles dry, clean and free from oil and grease.
Greasy, oily handles are slippery and lead to loss of control.
•
Use clamps to hold the workpiece in place. Do not work on any workpieces
that are too small for clamping.
If you hold the workpiece by hand, you cannot hold it sufficiently tightly against
rotation and may hurt yourself.
•
Switch the power tool off immediately if the bit jams.
The bit jams when:
- the power tool is overloaded or
- the workpiece to be machined is jammed.
•
Do not touch the bit after working before it has cooled down.
The bit is very hot during use.
•
Inspect the cable regularly and have a damaged cable repaired only by an
authorised customer service centre. Replace damaged extension cables.
This will ensure that the power tool remains safe.
•
Store unused power tools in a safe place. The storage place should be dry
and lockable.
This prevents the power tool from being damaged as a result of being stored or
operated by inexperienced people.
•
Never leave the tool before it has come to a complete standstill.
Over-running bits can cause injury.
•
Do not use the power tool with a damaged cable. Do not touch the damaged
cable and pull the mains plug if the cable is damaged while working.
Damaged cables increase the risk of electric shock.
•
The device is unsuitable for processing of foods.
• Never process any workpieces which could not be secured properly. Especially
round or uneven workpieces.
