22
AFTER SALES SUPPORT
1300 855 831
MODEL: DBG 150 PRODUCT CODE: 51893 02/2016
AUS
Cleaning and maintenance/Storage/Transport/Electrical connection
DBG 150
finished using it.
•
Clean the equipment regularly with a moist cloth and some soft soap. Do not
use cleaning agents or solvents; these could attack the plastic parts of the
equipment. Ensure that no water can seep into the device.
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to
damage from various types of commercial solvents and may be damaged by their
use. Use clean cloths to remove dirt, dust, oil, grease, etc.
m
WARNING!:
Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating
oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or
destroy plastic which could result in serious personal injury.
Maintenance
There are no parts inside the equipment which require additional maintenance.
Lubrication
All of the bearings in this tool are lubricated with a sufficient amount of high grade
lubricant for the life of the unit under normal operating conditions. Therefore, no
further lubrication is required.
Power supply cord replacement
If the power supply cord is damaged, it must be replaced only by the manufacturer
or by an authorized service center to avoid risk.
Wheel replacement (Figure 11)
If you must replace a grinding wheel, be sure to obtain one with a safe rated speed
at least as high as the “no load speed” RPM marked on the data plate of the grinder
and which is marked to comply with ANSI B7.1.
To replace the grinding wheel:
•
Unplug the grinder.
•
Remove the wheel cover by loosening the screws.
•
Loosen the wheel nut in a clockwise direction for the left side and an anti -
clockwise direction for the right side.
•
Remove the outer flange and grinding wheel.
•
To install a new grinding wheel, reverse the above procedure.
•
Dress the wheel nut with an open-end wrench (size 19 mm)
• NOTE
: Be sure the grinding wheel and outer flange are properly seated on the
spindle shaft.
X. Storage/Transport