22
Phone numbers
E-mail and Web
ID
Headquarters
+420 725 877 063
Reg. No.: 29048575
Libocka 653/51b
+420 725 955 464
www.workswell.eu
VAT No. CZ29048575
Prague, Czech Republic
All pictures are only for illustration.
Real values may vary.
Work
swel
l I
nfr
ar
ed
Camer
a
Camera
recalibration
It is highly recommended to send the WIC camera with all accessories for recalibration and
predictive maintenance and service procedure. After one year of using, the optical system can be
polluted or mechanically changed. Also the temperature drift inside the camera can slightly change
the sensor parameters. For these reasons, the camera and specific lens has to be recalibrated.
Please send the camera back to Workswell company or another Workswell partner for one-year
recalibration procedure.
Cleaning the WIC
head and cables
Liquids:
Use one of these liquids:
Warm water
A weak detergent solution
Equipment:
A soft cloth
Procedure:
1)
Soak the cloth in the liquid.
2)
Twist the cloth to remove excess liquid.
3)
Clean the part with the cloth.
Cleaning the
infrared lens
Liquids:
Use one of these liquids:
A commercial lens cleaning liquid with more than 30% isopropyl alcohol.
96% ethyl alcohol (C
2
H
5
OH)
DEE (= „ether“ = diethylether, C
4
H
10
O)
50% acetone (= dimethylketone, (CH
3
)
2
CO)) + 50% ethyl alcohol (by volume). This liquid
prevents drying marks on the lens.
Equipment:
Cotton wool
Procedure:
1)
Soak the cotton wool in the liquid.
2)
Twist the cotton wool to remove excess liquid.
3)
Clean the lens one time only and discard the cotton wool.
Warning:
Make sure that you read all applicable MSDS (Material Safety Data Sheets) and warning
labels on containers before you use a liquid: the liquids can be dangerous.
Caution:
Be careful when you clean the infrared lens. The lens has a delicate anti-
reflective coating.
Do not clean the infrared lens too vigorously. This can damage anti-reflective
coating. Re-applying antireflective coating is not possible and is required to
change the lens.
Maintanance
