21
Phone numbers
E-mail and Web
ID
Headquarters
+420 725 877 063
Reg. No.: 29048575
Libocka 653/51b
+420 725 955 464
www.workswell.eu
VAT No. CZ29048575
Prague, Czech Republic
All pictures are only for illustration.
Real values may vary.
Work
swel
l I
nfr
ar
ed
Camer
a
Adding back and front IP cover
If you want increase the IP camera protection parts,
please add Back and Front cover for better
water and liquid dirty pollutions protection
and follow these steps:
1)
First install the Back part carefully.
The bigger cable gland is used for
USB3 devices. Cable has to be pushed
through from inside to outside, because
the connector to PC is smaller. Then put
the cable into cut hole.
The smaller cable gland is used for GigE ETHERNET cameras.
Cable has to be pushed through and then crimped.
2)
Connect cable to camera, insert back cover
to back side of camera and screw bolts (longest
bolt is down). Everything has to be tight enough
and all O-rings and sealing has to be installed
3)
Front IP protection cap can be screwed on the front camera
forehead. Please carefully screw the aluminium cap with germanium
window and tighten. There has to be no gap between front camera
forehead and aluminium tubus and germanium glass.
4)
Check the complete assembled camera with installed Front and back IP cover, if there are no gab
and everything is well sealed and placed. After you will install the Front and Back protection part,
please sprinkle the water on the camera and check if there is no ingress to the camera body.
