2
Programming and Adjustments
Generation 1.0 (170107 and 170119)
1.
Height calibration
a.
Touch and hold the DOWN button to move the desk to the lowest position (ensure all legs
are fully retracted).
b.
Measure the physical height of the desk.
c.
Touch and hold the HOME button until the display screen flashes.
d.
Use the UP and DOWN buttons to match the displayed height to the measured height.
e.
Touch the HOME button to complete the setting.
f.
To adjust, repeat steps
a
to
e
.
2.
Set the maximum height limit
a.
Touch and hold the UP button to move desk to the desired maximum height.
b.
Touch and hold the HOME button until the display screen flashes.
c.
Touch the UP button to complete the setting.
3.
Adjust the height Limit
a.
Touch and hold the UP button to move the desk to the highest position.
b.
Touch and hold the HOME button until the display screen flashes.
c.
Touch and hold the DOWN button until the display screen stops flashing. The height can then
be re-adjusted.
Generation 1.2 (170216) and Generation 2 (170816)
1.
Adjust CMS (Collision Mitigation System) sensitivity for downward movement (Generation 2 only)
a.
Remove all obstructions from under the desk and move desk to the lowest position. Ensure
all legs are fully retracted.
b.
Touch and hold the HOME button until you hear a beep and the display screen flashes.
c.
Touch M1 to set CMS sensitivity to 1 (most sensitive) or, touch M2 to set CMS sensitivity to 2
(less sensitive - default setting).
d.
Touch the HOME button to complete the setting.
NOTE: It is always preferred to set CMS sensitivity to 1.
2.
Height calibration
a.
Touch and hold the DOWN button to move the desk to the lowest position (ensure all legs
are fully retracted).
b.
Measure the physical height of the desk
c.
Touch and hold the HOME button until the display screen flashes.
d.
Use the UP and DOWN buttons to match the displayed height to the measured height.
e.
Touch the HOME button to complete the setting.
f.
To adjust, repeat steps
a
to
e
.
3.
Set the maximum height limit
a.
Touch and hold the UP button to move desk to the desired maximum height.
b.
Touch and hold the HOME button until a beep sounds and the display screen flashes.
c.
Touch the M1 button to complete the setting.
4.
Adjust the height limit
a.
Touch and hold the UP button to move the desk to the highest position.
b.
Touch and hold the HOME button until a beep sounds and the display screen flashes.
c.
Touch the up button to cancel previous height limit setting.
d.
Repeat step 3 (Set the maximum height limit) to reprogram height limit.
