Worksaver SSGB-8B, Owner'S/Operator'S Manual

Page: 36 / 36

OWNER’S /
OPERATOR’S
MANUAL
MODEL NO.
SSGB- 8
%
2&72%(5
WS-SSA005-OG
WORKSAVER, INC.
P.O. BOX 100 LITCHFIELD, IL 62056-0100 (217) 324-5973
WEB: http:// www.worksaver.com E-MAIL: sales@worksaver.com
SKID STEER MOUNTED
GRADER BLADE
MAKE EVERY DAY
A HOLIDAY
FROM ACCIDENTS!
WHEN ORDERING REPAIR PARTS,
ALWAYS GIVE THE FOLLOWING INFORMATION:
1. PART NUMBER
2. PART DESCRIPTION
3. MODEL NUMBER
4. NAME OF ITEM
SAFETY PRECAUTIONS
MOST ACCIDENTS OCCUR BECAUSE OF NEGLECT OR CARELESSNESS.
AVOID NEEDLESS ACCIDENTS BY FOLLOWING ALL OF THE SAFETY PRECAUTIONS LISTED BELOW.
•
Machinery should be operated only by those who are
responsible and are authorized to do so.
•
Stop the engine, lower all equipment, lock the brakes,
and remove the ignition key before dismounting from the
skid steer.
•
Never stand between skid steer and attachment while
skid steer is being connected to the attachment.
•
Loose fitting clothing should not be worn, to avoid catch-
ing on various parts.
•
Detach attachment in area where children normally do
not play.
•
When performing adjustments or maintenance on an
attachment, first lower it to the ground or block it secure-
ly at a workable height.
•
Only a qualified operator should be permitted on skid
steer when in operation; no riders allowed.
•
Make certain everyone is in the clear before starting
tractor or raising or lowering equipment.
•
Operate the skid steer and attachment only while seated
in the driver’s seat.
•
Reduce speed when transporting mounted attachments
to avoid bouncing and momentary loss of steering
control.
•
A heavy load can cause instability of the skid steer. Use
extreme care during road travel. Slow down on turns and
watch out for bumps. Skid steer may need front counter-
weights to counter-balance the weight of the attachment.
•
Reduce speed on hillsides or curves so there is no
danger of tipping.
•
Avoid driving too close to the edge of ditches or drop offs.
•
Do not transport implement on public roads without
reflectors and slow moving vehicle emblem in daylight
and with approved warning lights at night and other
periods of poor visibility.
•
Keep work area clear of all debris. Never assume an area
is clear. ALWAYS CHECK.
•
Check to make certain there are no buried utilities in the
work area before starting work.
•
Keep alert and watch the front as well as the rear when
working with the attachment.