Worksaver SSGB-8B, Owner'S/Operator'S Manual

Page: 18 / 36

16
HYDRAULIC VALVES
——————————————————
The Model SSGB-
%
grader blade is equipped with a
proportional current (PC) type hydraulic valve. This valve
provides smoother movement with the hydraulic
cylinders.
NOTE:
7R LQWHUIDFH ZLWK D /HLFD ODVHU V\VWHP SOHDVH
RUGHU2SWLRQDO/DVHU,QWHUIDFH-XQFWLRQ%R[.LW
IUR\GUDXOLFYDOYHFDQEHLQWHJUDWHGZLWKRWKHU
EUDQGV RI ODVHU V\VWHPV FKHFN
with your laser supplier
for which models are compatible.
7KH 7ULPEOHŠ 0RGHO
*&560 /DVHU UHFHLYHU LV QRW FRPSDWLEOH ZLWK WKH
SURSRUWLRQDOFXUUHQWYDOYH
SHEARPIN PROTECTION
——————————————————
There is an arm (part #811981) that connects the
moldboard weldment of the grader to the hydraulic cylin-
der that angles the blade assembly.
This arm is connected to the moldboard weldment by
a 5/16” X 2 1/2” standard clevis pin (part #2504244 – pkg.
of 10).
These pins are available from the grader manufacturer.
In an emergency, you may use a 5/16” X 2 1/2” long
Grade 2 bolt.
DO NOT USE anything harder than a
Grade 2 bolt! Use of a hard bolt may result in damage to
the machine.
TRANSPORTING
——————————————————
OPERATING INSTRUCTIONS
(continued)
CAUTION!
When traveling on public roads, whether at night or
during the day, use accessory light and devices for
adequate warnings to operators of other vehicles.
Comply with all federal, state and local laws.
When Travelling To Another Work Area:
1. Tilt adjustment plate backward to place the front tires
of the skid steer back on the ground.
2. Lift loader arms off the frame stops.
3. Raise grader blade.
4 Drive to new work area.
Check visibility. If visibility is impaired, reduce speed or
consider other means of transport.
Allow for additional length of loader and attachment on
skid steer while turning.
Select a safe ground travel speed when transporting
from one area to another. When traveling on roadways,
transport in such a way that faster moving vehicles may
pass you safely.
When traveling over rough or hilly terrain or when
making turns, slow down and use extra care.
Read all the safety warnings in the front of this manu-
al and in the manual of skid steer.
Transporting Unit On Truck Or Trailer:
The unit may be lifted and moved by a crane.
1. Disconnect grader from skid steer unit.
2. Secure crane hook to lift lug located on top of main
frame.
3. Lift the entire unit off the ground and carefully load on
truck or trailer.
If transporting unit on a trailer, tie down the unit by the
torsion tube and the mounting plate.
Use extra care when loading for unloading unit onto
trailer or truck.
NEVER secure rods or linkages on unit that could be
damaged when securing grader to transport vehicle.