SAFETY REQUIREMENTS
AVOID ACCIDENTS BY FOLLOWING ALL OF THE SAFETY REQUIREMENTS LISTED BELOW.
OWNER’S /
OPERATOR’S
MANUAL
MODEL NO.
SS-590
JUNE 2014
WS-SSA009-OG
WORKSAVER, INC.
P.O. BOX 100 LITCHFIELD, IL 62056-0100 (217) 324-5973
WEB: http:// www.worksaver.com E-MAIL: [email protected]
MAKE EVERY DAY
A HOLIDAY
FROM ACCIDENTS!
SS-590 MIXER
WHEN ORDERING REPAIR PARTS,
ALWAYS GIVE THE
FOLLOWING INFORMATION:
1. PART NUMBER
2. PART DESCRIPTION
3. MODEL NUMBER
4. NAME OF ITEM
•
Machinery should be operated only by those who are
responsible and are authorized to do so.
•
Stop the engine, lower all equipment, lock the brakes,
and remove the ignition key before dismounting from the
skid steer.
•
Never stand between skid steer and attachment while
skid steer is being connected to the attachment.
•
Loose fitting clothing should not be worn, to avoid catch-
ing on various parts.
•
Detach attachment in area where children normally do
not play.
•
When performing adjustments or maintenance on an
attachment, first lower it to the ground or block it secure-
ly at a workable height.
•
Only a qualified operator should be permitted on skid
steer when in operation; no riders allowed.
•
Make certain everyone is in the clear before starting
tractor or raising or lowering equipment.
•
Operate the skid steer and attachment only while seated
in the driver’s seat.
•
Reduce speed when transporting mounted attachments
to avoid bouncing and momentary loss of steering
control.
•
A heavy load can cause instability of the skid steer. Use
extreme care during road travel. Slow down on turns and
watch out for bumps. Skid steer may need front counter-
weights to counter-balance the weight of the attachment.
•
Reduce speed on hillsides or curves so there is no
danger of tipping.
•
Avoid driving too close to the edge of ditches or drop offs.
•
Do not transport implement on public roads without
reflectors and slow moving vehicle emblem in daylight
and with approved warning lights at night and other
periods of poor visibility.
•
Keep work area clear of all debris. Never assume an area
is clear. ALWAYS CHECK.
•
Check to make certain there are no buried utilities in the
work area before starting work.
•
Keep alert and watch the front as well as the rear when
working with the attachment.
