Workrite Ergonomics | 800.959.9675 www.workriteergo.com
7 of 11
1.00
Place one long foot (L) onto
each leg and the corner
foot (M) onto the corner leg
as shown. Install two (2)
M8 × 1.25P × 20 mm flat head
Allen screws (O) into each foot
and tighten securely with the
5 mm Allen wrench (U).
Install two (2) glides (V)
into each foot as shown.
Install one (1) corner glide (W)
into corner foot.
ATTACH FEET
5.1
5.2
5.3
Choose the switch location for either right or left hand installation.
Note: Right is on the left when table is upside down.
Place the switch (B) as shown and drill ½" deep pilot holes with
a
3
⁄
32
" drill bit.
Measure and mark the switch location with a pencil on the top
using the dimensions shown.
Install two (2) #8 × ⅝" Phillips screws (P) and tighten securely.
ATTACH SWITCH
6.1
6.2
6.4
6.3
5
Hardware at actual size
O
M8 × 1.25P × 20 mm Flat Head
Allen Screw
L
5.1
5.1
5.1
5.2
5.3
6
P
#8 × ⅝" Pan Head
Screw
6.3
6.4
6.2
B
U
O
O
O
V
V
M
W
P