4 of 11 Workrite Ergonomics | 800.959.9675 www.workriteergo.com
43.75"
40"
37.75"
34.75"
21"
43.75"
40"
37.75"
34.75"
21"
Floating Side,
Right Configuration
Floating Side,
Left Configuration
To avoid stripping the threads, always
insert and make the first few turns
of the screw BY HAND with an Allen
wrench (T), ensuring it is in straight.
When shown upside down, right will be on your left and vice-versa. Your frameset may differ.
Use with 70" widths
Use with 64" widths
Use with 58" widths
Note: Brackets can be sized
in 3" increments for any
non-Workrite top.
Use with 42"–54" widths
Assemble rear brackets (J) to connector bracket (K) using
#M6 × 1.0P × 12 mm flat head Allen screws (N) and tighten
securely with the 4 mm Allen wrench (T).
Use this guide below to determine the correct holes for
mounting based on the width of your work center.
Note: Left hand assembly for use on left end of top shown.
Reverse J &K for Right hand assembly for use on right end
of top.
ASSEMBLE REAR FLOATING STRETCHER BRACKET
2.1
2
Hardware at actual size
N
M6 × 1.0P × 12 mm Flat Head
Allen Screw
NOTE!
Only use the #M6 × 1.0P × 12 mm flat
head Allen screw (N) for assembly.
T
N
N
N
J
J
J
J
K
K
K
