Workrite Ergonomics | 800.959.9675 www.workriteergo.com
7 of 10
Place the DMP240 power supply (C) in the center of the top
as shown and drill ¾" deep pilot holes with the ⅛" drill bit.
Place a cable spool (O) on each side of the power supply
between the leg and the power supply. Drill ¾" deep pilot
holes with the ⅛" drill bit for each cable spool.
Attach the power supply to the top using two (2) #12 × ¾"
Phillips pan head screws (N) and tighten securely.
Attach each cable spool (O) to the top using one (1)
#12 × ¾" Phillips pan head screws (N) and tighten securely.
ATTACH POWER SUPPLY & CABLE SPOOLS TO WORKSURFACE
6.1
6.3
6.2
6.4
6
6.2
6.1
6.3
6.3
6.4
6.4
C
N
#12 × ¾" Phillips Pan Head
Screws
Hardware at actual size
O
O
N
N
N
