6 of 10 Workrite Ergonomics | 800.959.9675 www.workriteergo.com
1.00
Place one foot (J) onto each
leg as shown. Install two (2)
M8 × 1.25P × 20 mm flat head
Allen screws (L) into each foot
and tighten securely with the
5 mm Allen wrench (R).
Install two (2) glides (S)
into each foot as shown.
ATTACH FEET
4.1
4.2
Choose the switch location for either right or left hand installation.
Note: Right is on the left when table is upside down.
Place the switch (B) as shown and drill ½" deep pilot holes with
a
3
⁄
32
" drill bit.
Measure and mark the switch location with a pencil on the top
using the dimensions shown.
Install two (2) #8 × ⅝" Phillips screws (M) and tighten securely.
ATTACH SWITCH
5.1
5.2
5.4
5.3
4
R
L
L
L
L
S
S
S
S
4.1
4.1
4.2
4.2
5
5.3
5.4
5.2
B
M
Hardware at actual size
L
M8 × 1.25P × 20 mm Flat Head
Allen Screw
M
#8 × ⅝" Pan Head
Screw
