Workrite Ergonomics | 800.959.9675 www.workriteergo.com
15 of 18
Install Inlay Power Module (If Using Recessed Power Module, Skip to Step 15)
12.1 Attach Inlay Face to Power Module with (2) 7/16” Flange Nuts and tighten with the 7/16” wrench
12.2 Place inlay power module assembly into top cutout (be sure power outlets under the desk face forward when
installing module assembly)
12.3 Place a Mounting Tab on each stud and install (1) Thumb Nut onto each stud and tighten securely
12.4 Connect Cross Cable to power module assembly until it snaps in
Note: Connectors are color coded to align connection properly
Note: There is no cross cable to power module connection on the last unit in a bench system assembly
Repeat for each additional station in the Bench System
Install Grommets & Recessed Power Cover
13.1 Install Oval Grommet Covers
13.2 For Recessed Power place large rectangular
Grommet Cover into Top
13.3 Secure rectangle grommet cover in place
with (2) #6 x ½” Phillips Screws
Repeat for each additional station
in the Bench System
12
Below
Below
12.1
12.2
12.3
12.4
13.1
13.1
13.2
13
