3 of 7
Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Lock Legs into their vertical position
Use the 5 mm Allen Wrench to install four #M8 × 14 mm Socket Head Leg Screw (F) to the outer leg mounts at the
base of both legs and tighten securely.
Note: You may need to rotate the Counterbalance Adjustment Rod to easily access the holes behind to install
and tighten the screws. See
Step 11d for instructions on using the ⅜" Ratchet to rotate the Adjustment Rod.
Use the 5 mm Allen Wrench to tighten the four pre-installed Socket
Head Leg Screws at the inner leg mounts on both legs.
Replace Cover Plate
Lift the Base Assembly to align
the cover tabs to the notches in
the top of the frame and place
cover onto base.
Use the eight M4×10 screws (E) to
secure the Cover Plate.
b
b
a
a
lift
F
F
F
F
E
3
4
a
b
b
c
c
c
c
c
c
a
a
a
a
Counterbalance
Adjustment Rod
