7 of 7
Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Adjust Feet Guides
If necessary, adjust leveling guides on table feet to level the worksurface. Unscrew to increase height, screw in to
decrease height.
12
✓
Cleaning instructions
To clean the Cascade Counterbalance Base, apply non-abrasive cleaner to a soft cloth then gently wipe the
worksurface or outside of the legs and feet.
Suggested cleaners: Windex or Formula 409.
Do not use solvents and do not saturate or spray cleaners directly to base.
Do not use grease or clean the counterbalance mechanism with solvents. Never use silicone products on the
legs, as this may cause squeaking.
Adjusting the Counterbalance Mechanism
Depending on the size of your workcenter and the items you place on it,
you may require an adjustment to the counterbalance mechanism to find
a setting that will allow your worksurface to move with minimal human
force.
Load all work items onto the worksurface to have the
actual working weight on the table.
Pull the Counterbalance Trigger to
carefully
test the
counterbalance setting. With the work items on the
worksurface, you will probably need to adjust the
tension.
Locate the counterbalance adjustment port on the
right side of the Base Assembly.
Using a ⅜" ratchet, crank the counterbalance
adjustment clockwise to ADD tension to
counterbalance MORE weight, or counterclockwise
to counterbalance LESS weight.
Note: It will take 10 to 20 full revolutions to make a
noticeable change in adjustment.
Note: Proper adjustment results in equal user force
to raise or lower the table.
11
#1500213- Rev D
a
a
b
b
c
c
d
d
