14
FAQ.
1. My dryer turns on but the belt isn't spinning.
Does the belt turn easily by hand? If yes, loosen the belt. (Image 1) Next, using pliers pull the belt pin to separate the two ends of
the belt (Image 2 and 3)
Image 1
Next unplug the belt drive motor (Image 4). Remove the motor and roller assembly and set it on a flat surface (Image 5). With the
assembly now removed, inspect the chain and sprockets. If the chain has come off it will need to be put back on, however, there is
a reason it has come off. Inspect the sprockets for damage or missing teeth, the sprocket should look like the sprocket in Image 6.
If sprocket is good, next check sprocket alignment (Image 7). If sprockets are misaligned check the set screws on the bearings that
secure the roller shaft (Image 9).
Image 2
Image 3
Image 4
Image 5
Image 6
Part
AE
Chain
Part
AD
Roller Sprocket
Part
AF
Motor Sprocket
WARNING!
RISK OF ELECTRICAL SHOCK! Turn ALL power to unit OFF before service
.
All service should be done by or under the supervision of a trained technician
