Manually test a stroke while setting up a design. Press and
hold the button for one second to activate.
The table is cycled by pushing and holding the button with
the shirt icon with arrows on each side for three seconds.
The machine will rotate in the direction that was specified
earlier.
The pallet is raised and lowered by pushing and holding the
button with the shirt icon that has arrows above and below
it for one second. The machine will raise. Press and hold
again to lower the machine.
Flood speed is adjusted by turning the knob clockwise to
increase or counter-clockwise to decrease the speed of the
carriage.
Print speed is adjusted by turning the knob clockwise to
increase or counter-clockwise to decrease the speed of the
carriage.
3730 E. Southern Avenue, Phoenix, AZ 85040 USA
800-778-8779
Workhorseproducts.com
19
Print Head Controls
