14
3730 E. SOUTHERN AVE., PHOENIX, AZ 85040 | USA
TOUCH SCREEN CONTROLS
PLUG-N-GO MODE
When the flash is in plug-n-go mode a lightning bolt icon will appear on the press graphic.
Touch the print head to display the sub menu with the options to control the flash.
ACTIVE
Select “Yes” for the print head to be active
FLASH HEAD
Select “On” for the print head to be active
FLASH WITH or AFTER INDEX
“WITH”: The flash will turn on when the platens begin to move from one station to another,
allowing the flash to have more time to heat up while the press is indexing. This mode is
recommended when you need a hotter, faster flash.
“AFTER”: The flash will turn on after the press completes index. This mode is recommended
when you need a cooler flash (which is necessary for sensitive compound fabrics).
FLASH TIME
The flash time represents the amount of time the press holds the platens in the up position
until the flash curing process is complete. Optimization of this time is essential because it will
have a dramatic effect on production numbers. The time can be lowered after the press has
been running and the platens are heated. Be wary of setting the flash timer for too long, this
could ruin the ink and not adhere if the layer is too cured.
(A)
(B)
(C)
(D)
