12
3730 E. SOUTHERN AVE., PHOENIX, AZ 85040 | USA
TIMER TEST + TIME KNOB
These features are used in conjunction with the IR Sensor (
pictured below
). The IR Sensor is
used with older Workhorse Autos, manual presses and non Workhorse manufactured presses.
Timer test
= toggle switch that is used to turn the bulbs on to ensure they are working and to
confirm proper timing
Time knob
= manually controls the duration of the flash (left for shorter duration, right for
longer duration)
IR sensor
= recognizes when the pallet
indexes and triggers the flash
To use these features the flash CANNOT
be connected to your press via the
communication cable.
CONTROLS
HEAT ZONE OPTIONS
Heat zone options allow the operator to choose which part of the flash is used. Zones can be
used individually or in combinations. This allows you to control the amount of heat needed to
flash an image. Heat zone options work in both Sensor and Plug-N-Go modes.
Heat Zone 1 = Bottom Elements
Heat Zone 2 = Middle Elements
Heat Zone 3 = Top Elements
POWER INDICATOR
The red light will illuminate when the flash is on.
(A)
(B)
(C)
(D)
(E)
(A)
(B) (C) (D)
(E)