Worker IN 4325, User Manual

Page: 16 / 27

ASSEMBLY INSTRUCTIONS:
We recommend that two adults work together to assemble this game.
1) Open the 2 cartons of your new football table close to the place where you are actually going to use the table.
2) Remove all the contents from inside the cartons and verify that you have all the listed parts as shown on the
parts list. We suggest that you use the bottom carton as a clean flat working area to protect the table. Carefully
cut or tear the four carton corners from the largest carton so that the bottom carton is now your work area.
FIG.1.
3)Attach one Goal End Board (#2) between the Side Boards (#1) using two Bolts(#10) and two Washers(#11) per
side as shown in FIG 1 and 1A.
NOTE:Do not tighten the screws too fast now,in a later step you will have to do so.
4) Slide the Playfield(#4) with graphics facing down as shown in FIG.1.If the field does not slide smoothly,check
to be sure you have not over tightened any screws or the playfiled is not caught by the slot.
FIG.2.
5) Repeat the step to attach the other Goal End Board (#2) to Side Boards (#1) as shown in
FIG 2.NOTE:Be sure that two side Boards (#1) and goal end boards (#2) are square.
6) Fix the Soccer Playfield (#4) on the Goal End Boards (#2) using four Washer Head Screws(#12) as shown in
FIG.2.
CAUTION :Do not hold
the playfield by the
corners,it may break off.