3 Turn the encoder without tapping any button, the cursor moves up and
down, selecting the desired item to set the parameters.
4 When USER CURVE is selected, press this button, you can enter
Curve edit menu.
2.4.1 DMX Fail
Here the reaction to failing DMX signal can be programmed
- HOLD : holds the last received DMX signal until a new DMX signal
reaches the dimmer.
The analogue input(0~10V) will be switched off,
- OFF : holds the last received DMX signal for 1 second and then
switches off.
when a valid DMX signal is received.
- CHA 1s : starts the internal chase after waiting for 1 second.
- M1 1s : calls the internal memory No.1 after waiting for 1 second.
- M2 1s : calls the internal memory No.2 after waiting for 1 second.
Note : Calling of other memories is the same as above.
6
3
- CHA 9s : starts the internal chase after waiting for 9 seconds.
Page 20
2. Operating Guide
2.4 Setup Menu
OPERATION
- M1 9s : calls the internal memory No.1 after waiting for 9 seconds.
- M2 9s : calls the internal memory No.2 after waiting for 9 seconds.
Note: That other memories are called is similar to that described above.
The actual status will be displayed in the Top Menu (message :
" NO DMX"
)
CHASE
1
DMX IN
Recibe señal DMX
DMX OUT
2
3
4
6
5
MIDI/LINK THROUGH
Switch-through MIDI/LINK Message
LINK OUT
MIDI/LINK IN
Envía señal DMX de salida
Envia señal de conexión de salida
ANALOG IN
Recibe señal analógica
Recibe mensajes MIDI/LINK
1. Vista General
1.2 Vista Trasera
3
Pagina 34