(13) Play the CD tape.
When you press the CD power switch's button to on, then the
compact disc player will display, at the same time, tell you that
the CD player at the state of ready work.
a. Press the open/close button, the CD window will push out,
then take a CD tape in it. Next, press the same button again
and after wait about for 5seconds press the play/Pause button,
at this time, the CD player was working at the normal conditions.
b. CD function buttons.
" "CD power switch with two-position for ON-OFF modes, before
press it, please turn off the master volume.
"OPEN/CLOSE"
, Press the open/close button, the CD window will
push out; press the same button again the CD window will push in.
"PLAY/PAUSE"
, when press it, the CD player will playback;
press the same button again, the CD player will pause play.
LEVEL
. The VR is CD volume control with adjust gain of CD
volume "STOP", when press it, the CD player will stop playback;
"B.SKIP/REW"
, when press it, the CD player will backward skip;
"F.SKIP/FF"
, when press it, the CD player will forward skip;
"REPEAT"
, when press it, the CD player will repeat to play the
same song ,press it again the CD player will repeat to play all.
If press it again, the CD player will return to normal conditions
of playing.
"PROG"
when press it, the CD player can setup in accordance
with your favoured selections.
NOTE:
Before you press the power button to on. Be sure to the
all volume VR to minimum.
¡
10
¡
7.Trouble shooting
This unit is designed for trouble-free operation. Most problems
users encounter are due to operating errors. So, if you have a
problem, first check this list for a possible solution. If the problem
persists, do not attempt to service this unit by yourself, consult
your authorized service centers or a highly qualified personnel.
