¡
8
¡
(2) The sum of the power capacities of the speakers must not
exceed the output power capacity of the amplifier.
(3) The length of the connecting cables must be short as poss-
ible; in any case, the cables of long-distance must be covered
in cross-section.
6.Operation
BASIC OPERATION
(1) Press the POWER button to ON, then the power lights up;
press again to turn the power off, then the power lights extinct.
(2) Bass control, modifies the low-frequency sound of the left
and right channels as much as +/- 10dB. Set this control at a
suitable position for your taste and room acoustics.
(3) Treble control, modify the high-frequency sound of the left
and right channels as much as +/- 10dB. Set this control at a su-
itable position for your taste and room acoustics.
(4) CD,AUX-1,AUX-2, MIC, all have independent volume control,
unbalance input mic1 has priority in them. When the signal input
the mic1, the playing signal of AUX. CD. radio should be muting,
the mic1 signal will priority playing. turn the VOLUME clockwise
to increase the volume and counter clock wise to decrease it.
(5) Master volume control, turn the VOLUME clockwise to incr-
ease the volume and counter clockwise to decrease it, the volume
of the front, center, and rear channels is changed at the same
time.
(6) LISTENING TO BROADCASTS. You can use auto, manual
or preset tuning to select a radio station. Before use this function,
must press the radio's power button. When you press it again,
this function was cut off.
(7) AUTO TUNING. If broadcast signals are strong and there is
no interference, auto Tuning is possible.
a. Press the "BAND" button to select Am or Fm band.
