background image

EN

                                            PAGE 3

User Manual      PA 60/2

88 mm

483 mm

260 mm

INSTALLATION NOTES

At all times, the amplifier has to be operated under appropriate conditions. This includes that the
operation location provides sufficient ventilation and the device is not exposed to direct sunlight or direct 
radiation or reflection from any heat source. When installing the loudspeaker systems choose a location 
that is not affected by extreme or constant vibration or other mechanical oscillation. Also make 
sure that the speakers are installed at locations that are free from dust and moisture.

CAUTION

Do not take the risk of electro-shock or shock hazard. To reduce the risk of electro-shock, all connections 
have to be accomplished before it is permissible to connect the amplifier to the main supply, Before connecting 
the appliance to the mains supply, once again make certain that all connections are carried out correctly and 
that no short-circuits exist. The overall sound reinforcement installation has to be in accordance to the laws, 
regulations, standards, and guidelines that are relevant and applicable in the country where the equipment is 
going to be operated.

AC POWER SUPPLY CAUTION

Before using the amplifier for the first time, make sure that the appliance's voltage is in accordance to 
your mains supply. Connect the amplifier only to grounded mains outlets. Connecting the amplifler to 
the mains supply (115/230Vac) has to be accomplished by inserting the supplied mains cord into the 
corresponding socket and afterward plugging it into a mains outlet.

Summary of Contents for PA 60/2

















Reviews: